[PLUG] Tata Indicom Photon+ configuration (Olive V-ME101)

Raseel Bhagat raseelbhagat at gmail.com
Sun Jan 9 10:10:39 PST 2011


On Sun, Jan 9, 2011 at 8:42 PM, Shyamgopal Kundapurkar <
kundapurkar at gmail.com> wrote:

> viral/arindam,
>
> 1) people who know me, usually call me shyam.
> 2) dmesg does not use /proc or /sys
> 3) usb-devices, lsusb and usb_modeswitch all need to use libusb and
> libusb-compat. to the best of my knowledge, neither libusb nor
> libusb-compat
> can still use sysfs. both are on usbfs. if i am wrong, can you please tell
> me which version of libusb and libusb-compat can plug into sysfs ? the
> hierarchy of usb device info nodes under /sys and /proc are entirely
> different. so even "bind"ing /sys/bus/usb to /proc/bus/usb wont do :(
> 4) the sysad at draisberghof has identified the usb controller chip
> (atheros????) used by tata photon+ (qualcomm 201e/2009) to be same as some
> earlier "heir" device marketed in europe and suggested a file under
> /etc/usb_modeswitch.d/ to be renamed as 201e:2009. the question was posted
> from pune. was it you arindam ? please check the following link --->
>
> http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=579&sid=9131409bea04ced85f4e85447332366f
>
>
>
> thanks and cheers guys !
>
>
> On Sun, Jan 9, 2011 at 2:01 AM, Arindam Mukherjee <
> arindam.mukerjee at gmail.com> wrote:
>
> > > <arindam.mukerjee at gmail.com> wrote:
> > >>
> > >> I guess if your kernel has usbfs support compiled (possibly there in
> > >> Ubuntu 10.x) then it should work. That way Parag might be able to get
> > >> it to work. With my case, there was no support (the earlier discussion
> > >> with Viral and Shyamgopal has the details).
> > >>
> > >> Cheers.
> > >
> > > Hi Arindam, To make this clear, USB FS will allow you to mount usb
> > > device entry to /proc/bus/usb/ and get devices file and other file
> > > entry. It is not must to use modem. you can use commands, such as
> > > dmsg, lsusb and check whether devices are present or not. You can also
> > > use sysfs entry and echo "1" to eject entry of sr device intend of
> > > doing mount / umount.
> > > Good Luck, Viral
> > >
> >
> > My bad. I guess Raseel's experience could be useful if we could figure
> > out the Vendor  +
> > Product specific MessageEndpoint and the MessageContent which is
> > written to this endpoint, for the Olive VME101. That entry should be
> > there in his /etc/usb_modeswitch.conf I guess.
> >
> > Hope to hear from you Raseel.
> >
> > Thanks,
> > Arindam
> >
> > _______________________________________
> > Pune GNU/Linux Users Group Mailing List
> >
> _______________________________________
> Pune GNU/Linux Users Group Mailing List
>


Hi guys,

sorry for posting the logs a little late, but here goes :

When I plug in the USB dongle,

raseel at raseel-laptop:~$ lsusb
[40339.216197] hub 2-0:1.0: unable to enumerate USB device on port 3
[40340.584178] usb 6-1: new full speed USB device using uhci_hcd and address
4
[40340.742420] usb 6-1: configuration #1 chosen from 1 choice
[40340.745465] scsi6 : SCSI emulation for USB Mass Storage devices
[40340.745781] usb-storage: device found at 4
[40340.745785] usb-storage: waiting for device to settle before scanning
[40345.746432] usb-storage: device scan complete
[40345.749293] scsi 6:0:0:0: CD-ROM            Qualcomm MMC Storage
2.31 PQ: 0 ANSI: 2
[40345.762348] sr1: scsi3-mmc drive: 297x/297x
[40345.762613] sr 6:0:0:0: Attached scsi CD-ROM sr1
[40345.762775] sr 6:0:0:0: Attached scsi generic sg2 type 5
[40345.817361] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51
00 00 00 00 00 00 00 02 00
[40345.817388] sr: Sense Key : Hardware Error [current]
[40345.817397] sr: Add. Sense: No additional sense information
[40345.879363] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00
00 00 00 00 00 20 00
[40345.879390] sr: Sense Key : Hardware Error [current]
[40345.879398] sr: Add. Sense: No additional sense information
[40346.054271] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00
00 00 00 00 00 20 00
[40346.054297] sr: Sense Key : Hardware Error [current]
[40346.054305] sr: Add. Sense: No additional sense information
[40346.157361] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00
00 00 00 00 00 20 00
[40346.157389] sr: Sense Key : Hardware Error [current]
[40346.157398] sr: Add. Sense: No additional sense information
[40346.230256] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00
00 00 00 00 00 20 00
[40346.230283] sr: Sense Key : Hardware Error [current]
[40346.230291] sr: Add. Sense: No additional sense information
[40346.265355] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00
28 00 00 00 00 10 00
[40346.265382] sr: Sense Key : Hardware Error [current]
[40346.265391] sr: Add. Sense: No additional sense information
[40346.299350] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00
20 00 00 00 00 18 00
[40346.299376] sr: Sense Key : Hardware Error [current]
[40346.299384] sr: Add. Sense: No additional sense information

And the device gets mounted as /dev/sr1

raseel at raseel-laptop:~$ ls /etc/usb_modeswitch.d/
0421:0610              0ace:2011  0af0:7031  0af0:7501  0af0:d055
1076:7f40  148f:2578               1b7d:0700
0471:1210              0ace:20ff  0af0:7051  0af0:7601  0af0:d057
1199:0fff  16d8:6803               1bbb:f000
0471:1237              0af0:6711  0af0:7071  0af0:7701  0af0:d155
12d1:1001  16d8:700a               1c9e:1001
04e8:f000              0af0:6731  0af0:7111  0af0:7801  0af0:d157
12d1:1003  16d8:f000               1c9e:9200
05c6:1000:sVe=Option   0af0:6751  0af0:7211  0af0:7901  0af0:d255
12d1:1414  19d2:0053               1c9e:f000
05c6:1000:uMa=AnyDATA  0af0:6771  0af0:7251  0af0:8200  0af0:d257
12d1:1446  19d2:2000               1dd6:1000
05c6:1000:uMa=SAMSUNG  0af0:6791  0af0:7271  0af0:8201  0af0:d357
12d1:1520  19d2:2000:uPr=USB_ZTE   1e0e:f000
05c6:1000:uMa=Vertex   0af0:6811  0af0:7301  0af0:c031  0fce:d0e1
12d1:1521  19d2:2000:uPr=ZTE_CDMA  1f28:0021
05c6:2001              0af0:6911  0af0:7311  0af0:d013  1004:1000
1410:5010  19d2:fff5
05c6:f000              0af0:6951  0af0:7361  0af0:d031  1033:0035
1410:5020  19d2:fff6
072f:100d              0af0:6971  0af0:7381  0af0:d033  106c:3b03
1410:5030  1a8d:1000
0930:0d46              0af0:7011  0af0:7401  0af0:d035  106c:3b06
1410:5031  1ab7:5700

Observe there is no "201e:2009" file there.

And,
raseel at raseel-laptop:~$ lsusb
Bus 006 Device 006: ID 201e:2009

When I "Safely Eject" this mounted device, I get the following Error pop-up
:
Unable to Stop Drive
Error detaching: helper exited with exit code 1: Detaching device /dev/sr1
USB device: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1)
SYNCHRONIZE CACHE: synchronize cache(10): transport: Host_status=0x07
[DID_ERROR]
Driver_status=0x08 [DRIVER_SENSE, SUGGEST_OK]

FAILED: No such file or directory
(Continuing despite SYNCHRONIZE CACHE failure.)
STOP UNIT: start stop unit: transport: Host_status=0x07 [DID_ERROR]
Driver_status=0x00 [DRIVER_OK, SUGGEST_OK]

FAILED: No such file or directory


Hope this helps.

--
Raseel


More information about the plug-mail mailing list